Load data for .30 PICRA + .308 | 150gr | Berger Target FB

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Berger Target FB
Manufacturer SKU:	30407
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.155" \| 29.3mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.274" \| 7.0mm
Shank Seated Depth:	0.274" \| 7.0mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B1058_C311
Last updated:	2025-01-01

Load data for 58 loads in caliber .30 PICRA with .308 | 150gr | Berger Target FB bullet and 29 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	74%	35085	86%	**53	100%
ADI APS 450	<<locked>>	64%	35926	88%	**37	100%
Accurate 4100	<<locked>>	75%	35375	87%	**39	90%
[Accurate No. 11 FS]*	<<locked>>	85%	36506	90%	**58	83%
Accurate No. 9	<<locked>>	65%	36216	89%	**39	96%
Accurate TCM	<<locked>>	65%	36332	89%	**32	97%
Alliant 2400	<<locked>>	72%	35868	88%	**45	93%
Alliant BLUE DOT	<<locked>>	74%	35766	88%	**16	98%
[Hodgdon H110]*	<<locked>>	79%	34795	86%	**55	86%
Hodgdon LilGun	<<locked>>	81%	35346	87%	**98	93%
Hodgdon TrailBoss	<<locked>>	96%	24729	61%	**2	100%
Lovex D037.2	<<locked>>	64%	36216	89%	**39	96%
Maxam CSB 1	<<locked>>	64%	34084	84%	**99	100%
Ramshot Enforcer	<<locked>>	71%	34940	86%	**35	94%
ReloadSwiss RS 14	<<locked>>	92%	22365	55%	**6	100%
ReloadSwiss RS 24	<<locked>>	63%	36172	89%	**16	100%
ReloadSwiss RS 30	<<locked>>	97%	35520	87%	**91	90%
Rottweil P 806	<<locked>>	63%	35969	89%	**76	100%
SNPE Vectan A0	<<locked>>	64%	35099	86%	**48	100%
SNPE Vectan BA6 1/2	<<locked>>	95%	32619	80%	**02	95%
SNPE Vectan BA7 1/2	<<locked>>	68%	35476	87%	**14	100%
Shooters World Heavy Pistol	<<locked>>	64%	36216	89%	**39	96%
[Somchem S265]*	<<locked>>	88%	36172	89%	**22	86%
Vihtavuori 3N38	<<locked>>	70%	35041	86%	**86	100%
Vihtavuori N105	<<locked>>	74%	35505	87%	**12	100%
Vihtavuori N110	<<locked>>	90%	35824	88%	**68	94%
Vihtavuori N32C Tin Star	<<locked>>	79%	35317	87%	**24	100%
Vihtavuori N350	<<locked>>	64%	34940	86%	**07	100%
[Winchester 296]*	<<locked>>	79%	35215	87%	**81	83%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	24801	61%	**96	100%
ADI APS 450	<<locked>>	61%	33228	82%	**07	100%
[Accurate 4100]*	<<locked>>	61%	22336	55%	**12	81%
[Accurate No. 11 FS]*	<<locked>>	82%	32590	80%	**02	81%
Accurate No. 9	<<locked>>	61%	32213	79%	**73	94%
Accurate TCM	<<locked>>	61%	32300	80%	**70	95%
[Alliant 2400]*	<<locked>>	61%	25396	63%	**71	87%
Alliant BLUE DOT	<<locked>>	61%	24903	61%	**42	94%
[Hodgdon H110]*	<<locked>>	71%	26745	66%	**17	81%
[Hodgdon LilGun]*	<<locked>>	62%	18623	46%	**76	80%
Hodgdon TrailBoss	<<locked>>	60%	12923	32%	**5	100%
Lovex D037.2	<<locked>>	61%	32213	79%	**73	94%
Maxam CSB 1	<<locked>>	61%	31705	78%	**70	100%
[Ramshot Enforcer]*	<<locked>>	61%	24758	61%	**68	88%
ReloadSwiss RS 14	<<locked>>	61%	12908	32%	**8	100%
ReloadSwiss RS 24	<<locked>>	61%	33823	83%	**80	99%
[ReloadSwiss RS 30]*	<<locked>>	83%	24265	60%	**84	81%
Rottweil P 806	<<locked>>	61%	33736	83%	**50	100%
SNPE Vectan A0	<<locked>>	62%	32634	80%	**15	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	67%	15635	38%	**1	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	29124	72%	**32	100%
Shooters World Heavy Pistol	<<locked>>	61%	32213	79%	**73	94%
[Somchem S265]*	<<locked>>	78%	27760	68%	**94	81%
Vihtavuori 3N38	<<locked>>	61%	27093	67%	**61	98%
Vihtavuori N105	<<locked>>	61%	23163	57%	**19	99%
[Vihtavuori N110]*	<<locked>>	67%	18333	45%	**43	81%
Vihtavuori N32C Tin Star	<<locked>>	62%	24279	60%	**9	100%
Vihtavuori N350	<<locked>>	61%	32590	80%	**78	100%
[Winchester 296]*	<<locked>>	76%	31604	78%	**16	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data